ZN-THS11C-S OMRON ZN-THS11C-S Next-Generation Production Environment Sensors

OMRON Next-Generation Production Environment SensorsZN-THS11C-S

ZN-THS11C-S Introduce | ZN-THS11C-S Catalog/Manual/Instructions/Software download

Brand: OMRON
Name: Next-Generation Production Environment Sensors
Model: ZN-THS11C-S
Appearance: Sensor head: 1.5 m type.
Temperature: Measurement range, –25 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 0 to 99%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1.
Easy temperature and humidity control with an SD Card.

Product name: Branch cable (cable length 1.3 m).
Power supply: Battery/DC cable.
Easy and Quick "Checking Power"at the Worksite. Category: ontology; power monitoring.
Application circuit: single phase 2 wire; single phase 3 wire; three-phase 3 wire.
Supply voltage: AC100 ~ 240V (50/60Hz).
Output function: open collector output; cumulative output pulse output; alarm output OMRON ZN-THS11C-S .
Communication specifications: RS-485 ZN-THS11C-S
Memory card function: No.
Simple monitoring of the use of electricity to support energy saving countermeasures.
On behalf of the use of the mechanical equipment, the measurement of the initial voltage, current,
Cumulative quantity, invalid power, power factor, frequency.
To achieve a simple record with a memory card OMRON ZN-THS11C-S . (with memory card function model)
The measurement data can be stored in the main body, and the centralized monitoring and management can be carried out in the communication network.
Wide 45mm miniaturization, simple set to the DIN guide. Air purification unit.
Apply: 410mm.
Power specifications: DC24V.
The more thin, more large wind ZN series flexible and quickly realize the cleaning OMRON ZN-THS11C-S .
Can be based on the size of the clean room selection of 3 sizes. Item (Measured particle diameter): Air Particle Sensor,
Particle measurement type 0.3, 0.5, or 1.0 µm min.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control. Rated primary current: 100 A OMRON Next-Generation Production Environment Sensors.
Rated secondary current: Special output.
Installation: Installed separately OMRON Next-Generation Production Environment Sensors.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function OMRON Next-Generation Production Environment Sensors.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power. ZN-THS11C-S . )
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settingss OMRON ZN-THS11C-S .
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.

...More relevant models >>>>